LM3423MH/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM3423 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Output Voltage | 72V |
| Max Supply Voltage | 75V |
| Min Supply Voltage | 4.5V |
| Output Current | 5A |
| Max Supply Current | 3mA |
| Quiescent Current | 2mA |
| Topology | SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 75V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | No |
| High Level Output Current | 35μA |
| Low Level Output Current | 35μA |
| Dimming | Analog, PWM |
| Number of Segments | 3 |
| Switching Frequency | 2MHz |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3423MH/NOPB Overview
The 20-PowerTSSOP (0.173, 4.40mm Width) package conserves board space. LED drivers designed using this technology use 1 outputs.The led light driver is mounted using Surface Mount.In this case, it emerges as a DC DC Controller with a high efficiency.It is possible for the led light driver to operate at a temperature of -40°C~125°C TJ.It is designed to work with 16 terminations.With a base of 20, this LED light driver is configured.3 segments exist.It's mounted on the way to Surface Mount.The LED driver can be found under the base part number LM3423.There is no maximum value acceptable for the supply voltage, so 75V is acceptable.On it, there are 16 pins.The minimum input voltage for this device is 4.5V.With a minimal supply voltage of 4.5V, it reaches the highest efficiency levels.The maximum value of supply current is 75V.When the supply current should be less than 3mA, the device will provide high efficiency.The current that can be supplied to the load is 5A.This electronic component can fully perform its functions when the switching frequency is kept at 2MHz.No external factors cause 2mA current to be consumed.A 72V voltage is output by it.
LM3423MH/NOPB Features
Available in the 20-PowerTSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TJ
Supply voltage of 14V
Switching frequency of 2MHz
Output voltage of 72V
LM3423MH/NOPB Applications
There are a lot of Texas Instruments LM3423MH/NOPB LED Driver ICs applications.
- Industrial LED Lighting: Image Recognition Devices
- A- lamps
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Medical surgery lighting
- OLED power supply for portable equipment
- Sports Facility Lighting
- White LED Backlight for portable equipment
- LED backlight driver for LCD displays for Tablets and Note PCs
- Dimmable LED for vehicle interiors
- Linear fluorescent
