LM3423Q0MH/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM3423 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Output Voltage | 75V |
| Max Supply Voltage | 75V |
| Min Supply Voltage | 4.5V |
| Output Current | 1A |
| Max Supply Current | 3.5mA |
| Quiescent Current | 2mA |
| Topology | SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 75V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | No |
| Dimming | Analog, PWM |
| Number of Segments | 1 |
| Switching Frequency | 2MHz |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3423Q0MH/NOPB Overview
There is also a 20-PowerTSSOP (0.173, 4.40mm Width) package that is used to save space on the board. These LED drivers have 1 outputs.The led driver mounting is done by using Surface Mount.It emerges as a DC DC Controller with high efficiency.The led light driver operates normally at -40°C~150°C TJ. It is designed to work with 20 terminations.A configuration of this chip is made up of 20 pins.The segment count is 1.There is a device mounted on the Surface Mount.Under the base part number LM3423, you'll find this LED driver.The voltage of 75V can be supplied.On this device, there are 20 pins.This device operates with a minimum input voltage of 4.5V volts.The system operates at a minimum supply voltage of 4.5V in order to achieve maximum efficiency.The maximum supply current is 75V.It is possible to obtain a high efficiency with this device when the maximum supply current is less than 3.5mA.There is no current that can be supplied to the load.This electronic component may perform its functions fully if the switching frequency is maintained at 2MHz.LED drivers from the Automotive, AEC-Q100 series are essential components for a wide variety of products.Absent external factors, there is 2mA consumption of current.This device has a voltage output of 75V volts.
LM3423Q0MH/NOPB Features
Available in the 20-PowerTSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~150°C TJ
Supply voltage of 14V
Switching frequency of 2MHz
Output voltage of 75V
LM3423Q0MH/NOPB Applications
There are a lot of Texas Instruments LM3423Q0MH/NOPB LED Driver ICs applications.
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Auxiliary lights for on-vehicle cameras
- Portable lighting
- Stage Lighting and Signage
- Stage and Studio lighting
- Dimmable LED for vehicle interiors
- Other Electronic Devices
- Replacement lamps
- Down lights
- LED backlight driver for LCD displays for Tablets and Note PCs
