LM3424MH/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 0.65mm |
| Frequency | 2MHz |
| Base Part Number | LM3424 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Max Supply Voltage | 75V |
| Min Supply Voltage | 4.5V |
| Output Current | 1A |
| Max Supply Current | 3mA |
| Quiescent Current | 2mA |
| Topology | Flyback, SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 75V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | No |
| Dimming | Analog, PWM |
| Number of Segments | 1 |
| Switching Frequency | 597kHz |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3424MH/NOPB Overview
There is also a 20-PowerTSSOP (0.173, 4.40mm Width) package that is used to save space on the board. For the design of this LED driver, 1 outputs are used.The mounting method adopted is Surface Mount.It emergys as a DC DC Controller with high efficiency and reliable performance.It is possible for the led driver ic to function normally at -40°C~125°C TJ.It operates based on the frequency of 2MHz.In this case, the terminations are set to 20.There are 20 pins on the base of this LED driver.A total of 1 segments are estimated.Surface Mount is mounted on it.It is under the base part number LM3424 that you can find this LED driver.75V is a maximum acceptable voltage for the supply.It consists of 20 pins.A minimal input voltage of 4.5V is required for it to operate.In order to achieve the highest efficiency, it is designed to operate at a low voltage of 4.5V.In the presence of a maximum supply current, the value of 75V will be reached.When the maximum supply current is below 3mA, the device can deliver high efficiency.A load can be supplied with 1A current.The electronic component can fully perform its functions if the switching frequency is maintained at 597kHz.No external factors cause 2mA current to be consumed.
LM3424MH/NOPB Features
Available in the 20-PowerTSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TJ
Frequency of 2MHz
Supply voltage of 14V
Switching frequency of 597kHz
LM3424MH/NOPB Applications
There are a lot of Texas Instruments LM3424MH/NOPB LED Driver ICs applications.
- Amusement Machines
- Constant Voltage Power Source for portable equipment
- Stage Lighting and Signage
- Industrial LED Lighting: Image Recognition Devices
- Linear fluorescent
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Flicker-free LED Lighting using R1580N
- Down lights
- Museum lighting
- OLED power supply for portable equipment
