LM3424QMHX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 0.65mm |
| Frequency | 2MHz |
| Base Part Number | LM3424 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Max Supply Voltage | 75V |
| Min Supply Voltage | 4.5V |
| Output Current | 5A |
| Max Supply Current | 3mA |
| Quiescent Current | 2mA |
| Topology | Flyback, SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | No |
| Dimming | Analog, PWM |
| Number of Segments | 1 |
| Voltage - Supply (Min) | 4.5V |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3424QMHX/NOPB Overview
The 20-PowerTSSOP (0.173, 4.40mm Width) package is used for saving board space. For the design of this LED driver, 1 outputs are used.In this case, mounting method is Surface Mount.The system emerges as a DC DC Controller with high efficiency.The led light driver can work at -40°C~125°C TJ.It operates on the basis of the frequency of 2MHz.For its operation, 20 terminations are designed.It is configured with 20 pins as its base.If the voltage supply is lower than 4.5V, undetermined failures may occur.The number of segments is 1.The device has been mounted on the Surface Mount.LED drivers can be found under the base part number LM3424.It is acceptable to supply voltages of 75V.There are 20 pins on this device.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 4.5V.When the supply current should be less than 3mA, the device will provide high efficiency.It is possible to supply the load with 5A current.A component of the Automotive, AEC-Q100 series, this LED driver is widely used in a variety of applications.There is no external factor that consumes current when there is 2mA current consumption.
LM3424QMHX/NOPB Features
Available in the 20-PowerTSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TJ
Frequency of 2MHz
Supply voltage of 14V
LM3424QMHX/NOPB Applications
There are a lot of Texas Instruments LM3424QMHX/NOPB LED Driver ICs applications.
- LED Lightings for Industrial Equipment
- Architectural lighting
- Amusement Machines
- Portable lighting
- Museum lighting
- Gallery lighting
- Constant Voltage Power Source for portable equipment
- A- lamps
- Sports Facility Lighting
- Auxiliary lights for on-vehicle cameras
