LM3429Q1MH/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Automotive |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Base Part Number | LM3429 |
| Number of Outputs | 1 |
| Output Voltage | 75V |
| Voltage | 10V |
| Max Supply Voltage | 75V |
| Min Supply Voltage | 4.5V |
| Output Current | 1A |
| Max Supply Current | 3mA |
| Quiescent Current | 1.6mA |
| Topology | SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 75V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | No |
| Dimming | Analog, PWM |
| Number of Segments | 1 |
| Switching Frequency | 2MHz |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3429Q1MH/NOPB Overview
14-PowerTSSOP (0.173, 4.40mm Width) saves board space. LED drivers design with 1 outputs.The mounting method is Surface Mount.It is highly performing and reliable when it emerges as a DC DC Controller.It is possible for the led driver ic to operate normally at -40°C~125°C TJ.The benefits are considerable for Automotive.It is designed to work with 14 terminations.This LED driver is configured with a base of 14 pins.Based on our estimates, there are 1 segments.The mount is on its way to Surface Mount.It is under the base part number LM3429 that the LED driver can be found.The supply voltage of 75V is an acceptable maximum value.In addition to Display Drivers, it is also classified by its characteristics.The minimal input voltage is 4.5V.It achieves maximum efficiency with a minimal voltage supply of 4.5V.In the presence of a maximum supply current, the value of 75V will be reached.It is possible to obtain a high efficiency with this device when the maximum supply current is less than 3mA.A load can be supplied with 1A current.This electronic component may perform its functions fully if the switching frequency is maintained at 2MHz.This LED driver belonging to the Automotive, AEC-Q100 series is a key component for a broad range of applications.A current of 1.6mA is consumed in the absence of external influences.This device has a voltage output of 75V volts.
LM3429Q1MH/NOPB Features
Available in the 14-PowerTSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TJ
Supply voltage of 14V
Switching frequency of 2MHz
Output voltage of 75V
LM3429Q1MH/NOPB Applications
There are a lot of Texas Instruments LM3429Q1MH/NOPB LED Driver ICs applications.
- LED Lighting PFCs, Linear Dimmable
- Down lighting
- Stage Lighting and Signage
- A- lamps
- Auxiliary lights for on-vehicle cameras
- Amusement Machines
- Medical surgery lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Stage and Studio lighting
- Constant Voltage Power Source for portable equipment
