LM3430SD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFDFN Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | Backlight |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.4mm |
| Base Part Number | LM3430 |
| Pin Count | 12 |
| Number of Outputs | 1 |
| Output Voltage | 60V |
| Input Voltage-Nom | 18V |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 6V |
| Output Current | 1A |
| Max Output Voltage | 60V |
| Topology | SEPIC, Step-Up (Boost) |
| Min Input Voltage | 6V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BUCK |
| Internal Switch(s) | No |
| Dimming | PWM |
| Switching Frequency | 2MHz |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM3430SD Overview
Using its 12-WFDFN Exposed Pad package, it is possible to save board space. Using this LED driver, there are 1 outputs.For mounting, it uses the Surface Mount method.In this case, it emerges as a DC DC Controller with a high efficiency.It is capable of operating at a temperature of -40°C~125°C TJ. There are considerable benefits for Backlight.It operates with terminations of 12.With 12 pins at the base, this LED driver has a base configuration.Surface Mount is mounted on it.This LED driver has the part number LM3430.It is acceptable to operate with a supply voltage of 40V.There are 12 pins on it.In addition, it can also be categorized into Switching Regulator or Controllers based on its characteristics.The minimum input voltage for this device is 6V.To meet the highest efficiency standards, it can be operated with a minimum supply voltage of 6V.Supply current cannot exceed 40V.The current that can be supplied to the load is 1A.As long as the switching frequency is maintained at 2MHz, this electronic component is able to perform all of its functions properly.The output voltage is 60V.60V should be the maximum output voltage.A circuit operated by the device has 18V volts.
LM3430SD Features
Available in the 12-WFDFN Exposed Pad package
Operating temperature of -40°C~125°C TJ
Switching frequency of 2MHz
Output voltage of 60V
LM3430SD Applications
There are a lot of Texas Instruments LM3430SD LED Driver ICs applications.
- Down lighting
- LED Lighting PFCs, Linear Dimmable
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Stage and Studio lighting
- LED headlights
- Portable lighting
- Linear fluorescent
- LED backlight driver for LCD displays for portable equipment
- Down lights
- Constant Voltage Power Source for portable equipment
