LM3430SD/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFDFN Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.4mm |
| Frequency | 2MHz |
| Base Part Number | LM3430 |
| Number of Outputs | 1 |
| Output Voltage | 16V |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 18V |
| Operating Supply Current | 3.5mA |
| Output Current | 35mA |
| Topology | SEPIC, Step-Up (Boost) |
| Min Input Voltage | 6V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 18ns |
| Fall Time (Typ) | 15 ns |
| Internal Switch(s) | No |
| Max Duty Cycle | 90 % |
| Isolation | Non-Isolated |
| Dimming | PWM |
| Switching Frequency | 1.115MHz |
| Voltage - Supply (Min) | 6V |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LM3430SD/NOPB Overview
To save board space, it uses the 12-WFDFN Exposed Pad package. LED drivers designed using this technology use 1 outputs.It is mounted using Surface Mount.When it emerges as a DC DC Controller, it shows high-performance and reliability.It is possible for the led driver ic to function normally at -40°C~125°C TJ.The benefits of Backlight are considerable.The system operates on the basis of the frequency 2MHz.It is designed to work with 12 terminations.To form its configuration, 12 pins are used.In the absence of a voltage supply of at least 6V, undetermined failures may occur.It has been mounted on Surface Mount.The LED driver is available under the part number LM3430.The Switching Regulator or Controllers is also assigned based on its characteristics.The minimal input voltage is 6V.In the case of supply current, there is a maximum value of 40V.There is no current available to supply to the load.Systems require 40V voltage to operate.The electronic component can function fully when the switching frequency is maintained at 1.115MHz.This device has a voltage output of 16V volts.When using the device, there is a voltage of 18V volts assigned to the circuit.
LM3430SD/NOPB Features
Available in the 12-WFDFN Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 2MHz
Operating with the supply voltage of 40V
Switching frequency of 1.115MHz
Output voltage of 16V
LM3430SD/NOPB Applications
There are a lot of Texas Instruments LM3430SD/NOPB LED Driver ICs applications.
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Stage Lighting and Signage
- Other Electronic Devices
- White LED Backlight for portable equipment
- Constant Voltage Power Source for portable equipment
- Replacement lamps
- LED backlight driver for LCD displays for Tablets and Note PCs
- Architectural lighting
- LED Lightings for Industrial Equipment
- Dimmable LED for vehicle interiors
