LM3450MT/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Base Part Number | LM3450 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 8.5V |
| Output Current | 200mA |
| Max Supply Current | 1.6mA |
| Quiescent Current | 1.6mA |
| Voltage - Output | 11.5V |
| Topology | Flyback, Step-Up (Boost) |
| Min Input Voltage | 8.5V |
| Max Input Voltage | 20V |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1.5A |
| Low Level Output Current | 1.5A |
| Dimming | Analog |
| Number of Segments | 1 |
| Switching Frequency | 460Hz |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3450MT/NOPB Overview
To save space on the board, it has a 16-TSSOP (0.173, 4.40mm Width) package. For the design of these LED drivers, 1 outputs are used.The led driver mounting is done by using Surface Mount.There is no doubt that this is a very efficient and reliable AC DC Offline Switcher.LED drivers capable of operating at -40°C~125°C TJ can be used.The terminations 16 are designed for its operation.With a base of 16, this LED light driver is configured.There are estimated to be 1 segments.It has been mounted on Surface Mount.It is under the base part number LM3450 that the LED driver can be found.It is acceptable for the supply voltage to be 20V.The voltage at the output terminal is 11.5V.There are 16 pins on it.As its minimal input voltage, it operates at a voltage of 8.5V.For maximum efficiency, it operates at the minimal voltage of 8.5V.There is 20V maximum value for supply current.A minimal supply current is required in order for this device to provide high efficiency.There is no current that can be supplied to the load.The electronic component can fully perform its functions if the switching frequency is maintained at 460Hz.Absent external factors, there is 1.6mA consumption of current.
LM3450MT/NOPB Features
Available in the 16-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TJ
Supply voltage of 14V
Switching frequency of 460Hz
LM3450MT/NOPB Applications
There are a lot of Texas Instruments LM3450MT/NOPB LED Driver ICs applications.
- Flicker-free LED Lighting using R1580N
- Dimmable LED for vehicle interiors
- LED Lightings for Industrial Equipment
- Scanners and Handy Terminals
- Industrial LED Lighting: Image Recognition Devices
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Down lighting
- Panel lighting
- A- lamps
- Down lights
