LM3475MFX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 200.998119mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM3475 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 10V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 10V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | 2.7V~10V |
| Quiescent Current | 260μA |
| Control Features | Enable |
| Input Voltage (Min) | 2.7V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Control Technique | HYSTERETIC CURRENT MODE |
| Synchronous Rectifier | No |
| Switcher Configuration | BOOST |
| Max Frequency | 2MHz |
| Duty Cycle (Max) | 100% |
| Switching Frequency | 2MHz |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3475MFX/NOPB Overview
With a SC-74A, SOT-753 package, the switching controller is suitable for a wide range of applications. 1 outputs can be generated with the dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control operates at 2.7V~10V and has a 2.7V~10V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. A generalization of dc dc regulator can be made using Surface Mount. To provide efficient switching control, Enable is included in the dcdc regulator. Connected to a SWITCHING REGULATOR analog IC, the switch converters are connected to a power supply. The switching converters's terminals (s) are designed at DUAL. 5 terminations with a variety of function. It includes HYSTERETIC CURRENT MODE as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis set to 5V. Searching "LM3475" will return other relevant dc to dc converter ics. In total, switching converter has 5 pins. The type is a particular Switching Regulator or Controllers of switching converter. It is recommended that the dc dc voltage regulator's minimum input voltage be 2.7V. As determined by the test statistics, the output voltage of DC regulator is 10V. In most cases, the output current of the dc dc regulator will be 5A, so note that when you start the project. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. The max frequency of the pmic can reach 2MHz. Users should apply 10V to operate the voltage regulator dc to dc safely and reliably. In a dormant state, the dc switching uses 260μA. This controller performs best at a frequency of 2MHz.
LM3475MFX/NOPB Features
Transistor Driver Outputs
Enable
HYSTERETIC CURRENT MODE
Switching Frequency: 2MHz
LM3475MFX/NOPB Applications
There are a lot of Texas Instruments LM3475MFX/NOPB DC to DC converter applications.
- Printing equipment
- Ball screw pair
- Elevator lighting
- Shearing machines
- Product burn-in
- CNC system
- Pipe bending machines
- Experimental setup
- Surge protection circuits
- Analog precision reference circuits
