LM3481MMX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM3481 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 41V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 48V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 2.97V~48V |
| Quiescent Current | 3.7mA |
| Control Features | Enable, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 2.97V |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 85 % |
| Clock Sync | Yes |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3481MMX/NOPB Overview
It comes in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, which makes switching controller suitable for most applications. For outputs of 1, this dc motor controller is suitable. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. A total of Transistor Driver dc switching's outputs can be handled by it. dc controls with 2.97V~48V voltage are supplied and operated. Suitable for a -40°C~125°C TJ dc switcher. It can switch at 100kHz~1MHz. dc dc regulator can be generalized using Surface Mount. The dcdc regulator features Enable, Frequency Control, Ramp, Soft Start for efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. An array of 10 terminations of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. LM3481 can be searched for other relevant dc to dc converter ics. 10 pins are present on switching converter. The minimum input voltage of the dc dc voltage regulator should be 2.97V. Test statistics indicate DC regulator outputs 41V voltage. In most cases, the dc dc regulator's output current is 1A. This information should be noted when you begin working with the component. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 85 %. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThis dc regulatorhas a max frequency of 1MHz. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 48V. In a dormant state, the dc switching uses 3.7mA.
LM3481MMX/NOPB Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %
LM3481MMX/NOPB Applications
There are a lot of Texas Instruments LM3481MMX/NOPB DC to DC converter applications.
- Boring machines
- Household control circuits
- Window air conditioners
- Power supplies of electronic gadgets
- Plate bending machines
- Combined machine tools
- Fire elevators
- Packaging
- Nuclear power plants
- Gear/thread machining machines
