LM3485MMX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | LM3485 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 35V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 35V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~35V |
| Quiescent Current | 250μA |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Control Technique | HYSTERETIC CURRENT MODE |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 100 % |
| Switching Frequency | 1MHz |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3485MMX/NOPB Overview
As a result of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. There is a Tape & Reel (TR) solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) are supported. This dc control operates at 4.5V~35V and has a 4.5V~35V supply voltage. A -40°C~125°C TJ dc switcher is not a problem. As it has a Surface Mount value, it can be used for general dc dc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Switching converters are designed with the terminal (s) at position DUAL . Different dc switching's functions can be applied to 8 terminations. It includes HYSTERETIC CURRENT MODE as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input is 12V. LM3485 can be used to locate other relevant dc to dc converter ics. 8 pins are on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 4.5V. Statistically, the DC regulator outputs 35V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 4A. Voltage regulator dc to dc is designed to operate at 100 % duty cycle during power-ups and power-downs to ensure reliability. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. Switching controller operates at 1MHz Hz. Users should apply 35V to operate the voltage regulator dc to dc safely and reliably. In dormant mode, 250μA is used. Voltage 12V must be supplied. At 1MHz, this controller will mostly work as expected.
LM3485MMX/NOPB Features
Transistor Driver Outputs
HYSTERETIC CURRENT MODE
Max Duty Cycle: 100 %
Frequency: 1MHz
Switching Frequency: 1MHz
LM3485MMX/NOPB Applications
There are a lot of Texas Instruments LM3485MMX/NOPB DC to DC converter applications.
- Packaging
- Analog precision reference circuits
- seismic instrument power circuits
- Digital display device
- Geothermal power
- Shearing machines
- Post equipment
- Printing equipment
- Automation technology
- Game consoles
