LM3485Q1MM/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM3485 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 35V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 35V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~35V |
| Quiescent Current | 250μA |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Technique | HYSTERETIC CURRENT MODE |
| Synchronous Rectifier | No |
| Max Frequency | 1MHz |
| Max Duty Cycle | 100 % |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3485Q1MM/NOPB Overview
As a result of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) compact design, the switching controller is compatible with most applications. For 1 outputs, the dc motor controller is appropriate. PMIC is packaged in a solid enclosure of Tape & Reel (TR). There are Transistor Driver dc switching's output (s) that it can handle. dc controls with 4.5V~35V voltage are supplied and operated. Qualified to work in an dc switcher with -40°C~125°C TJ. It is suitable for general dc dc regulator when it is set to Surface Mount. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. DUAL are the position of the terminal of the switching converters. A variety of terminations with 8 of dc switching. The control methods that these dc dc converter ics use include HYSTERETIC CURRENT MODE. A DC switcher's nominal voltage of 12V is input. In addition to "LM3485", there are other relevant dc to dc converter ics you can find. Pins number 8 of switching converter in total. It is recommended that the input voltage of the dc dc voltage regulator be 4.5V. Test statistics indicate DC regulator outputs 35V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 4A. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. This dc regulatorhas a max frequency of 1MHz. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 35V. It belongs to the Automotive, AEC-Q100 series of dc to dc voltage regulator. DC switching uses 250μA when it is dormant.
LM3485Q1MM/NOPB Features
Transistor Driver Outputs
HYSTERETIC CURRENT MODE
Max Duty Cycle: 100 %
LM3485Q1MM/NOPB Applications
There are a lot of Texas Instruments LM3485Q1MM/NOPB DC to DC converter applications.
- Handheld GPS
- Window air conditioners
- Scientific research
- Shearing machines
- Access control systems
- Smoke exhaust equipment
- Production lines
- Laboratories
- Medical monitoring systems
- Network technology
