LM348NSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM348 |
| Pin Count | 14 |
| Operating Supply Voltage | 18V |
| Power Supplies | +-15V |
| Number of Circuits | 4 |
| Operating Supply Current | 2.4mA |
| Nominal Supply Current | 2.4mA |
| Output Current | 25mA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 30nA |
| Voltage - Supply, Single/Dual (±) | 8V~36V ±4V~18V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 104.08dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.2μA |
| Programmable Power | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.05μA |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM348NSR Overview
The linear amplifier is packaged in a 14-SOIC (0.209, 5.30mm Width) case which makes it easy for the consumer to handle. This is a General Purpose type op amp. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. During the past two weeks, there have been close to 14 terminations. Linear amplifier has a total of 14 pins. It is important to remember that this op amp should be operated at a voltage of 15V volts. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. There are 14 pins on this chip. Op amp ic rates 1mV for input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. Using a supply current of 2.4mA , this buffer op amp will be able to operate. Keeping the voltage gain at 104.08dB is the best course of action. In total, there are 4 circuits on this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 18V. To pack the operational amplifier ics, TR is adopted as the packing method.
LM348NSR Features
14 Pins
supply voltage of 15V
104.08dB voltage gain
LM348NSR Applications
There are a lot of Texas Instruments LM348NSR Instrumentational OP Amps applications.
- Video computer boards
- Video data acquisition
- Addition operation circuits
- Tablets
- Integrator circuits
- Communication device
- Voltage regulation circuit
- Radar
- Signal transformation
- Wireless base stations
