LM34902ITM/NOPB
| Parameters | |
|---|---|
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Quiescent Current | 47μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Number of Inputs | 1 |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.8V~5.3V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 640m Ω |
| Height | 675μm |
| Length | 0m |
| Width | 0m |
| Thickness | 420μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WFBGA, DSBGA |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 640mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.4mm |
| Base Part Number | LM34902 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 300mA |
| Supply Voltage-Max (Vsup) | 5.3V |
| Supply Voltage-Min (Vsup) | 2.8V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 300mA |
LM34902ITM/NOPB Overview
It is package in Tape & Reel (TR) case.This file is included in package 6-WFBGA, DSBGA.The LED driver is mounted as Surface Mount.This switch is of type General Purpose.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts on this LED driver.The lighting driver has Status Flag features.It belongs to the family LM34902.In total, there are 6 terminations.In order to operate, the 6 pins are used.It consists of 1 functions.As a result, the maximum output current is reduced to 300mA in order to meet the operation requirements.High efficiency is possible at 3V supply voltage.It is mounted in the way of Surface Mount.The LED driver has 640mOhm resistance.It is set to 300mA in this case.In this LED driver, the maximum supply voltage is configured to be 5.3V (Vsup).Normal operation requires a voltage above 2.8V for the supply voltage.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.We currently have 1 channels available.We have available 1 inputs.
LM34902ITM/NOPB Features
Supplied from 3V
Resistance of 640mOhm
1 channels
LM34902ITM/NOPB Applications
There are a lot of Texas Instruments LM34902ITM/NOPB Power Switches ICs applications.
- PC Card Hot Swap
- Hard Disk Drives
- HDD and SSD
- PC Cards
- USB3.1 Power Delivery
- Hot-Swap Systems
- Solid State Drivers
- Notebook and Tablet Computers
- Wearable Devices
- Wireless/Networking Cards
