LM34904ITMX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WFBGA, DSBGA |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 400mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LM34904 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.3V |
| Supply Voltage-Min (Vsup) | 2.8V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Quiescent Current | 47μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Number of Inputs | 1 |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.8V~5.3V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 400m Ω |
| Height | 675μm |
| Length | 0m |
| Width | 0m |
| Thickness | 420μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM34904ITMX/NOPB Overview
As a result, it is packaged in the form of a Tape & Reel (TR).Package 6-WFBGA, DSBGA contains it.The mounting type of the LED driver is Surface Mount.General Purpose is the switch type it owns.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.As a default, the output is set to 1.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.As far as features are concerned, the LED driving board has Status Flag.It belongs to the LM34904 family.It contains 6 terminations.The 6 pins are used for the operation of the system.It contains 1 functions.This operation requires the maximum output current to be decreased to 500mA.Supply voltages of 3V allow for high efficiency.Surface Mount is mounted in the way of this lighting driver.Currently, the LED driving board has a resistance of 400mOhm ohms.It is set to 500mA in this case.The maximum supply voltage is set to 5.3V.The supply voltage (Vsup) should be kept above 2.8V for normal operation.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.A total of 1 channels are available for you to choose from.We have available 1 inputs.
LM34904ITMX/NOPB Features
Supplied from 3V
Resistance of 400mOhm
1 channels
LM34904ITMX/NOPB Applications
There are a lot of Texas Instruments LM34904ITMX/NOPB Power Switches ICs applications.
- Portable/Handheld Devices
- HDD and SSD
- Storage Drives
- Notebook and Tablet Computers
- Low Voltage I/O System Power
- Set-top-box
- Wireless Modem Data Cards
- Wireless/Networking Cards
- USB3.1 Power Delivery
- Wireless Headsets
