LM3492MH/NOPB
| Parameters | |
|---|---|
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Frequency | 200kHz~1MHz |
| Base Part Number | LM3492 |
| Number of Outputs | 2 |
| Output Voltage | 65V |
| Max Supply Voltage | 65V |
| Min Supply Voltage | 4.5V |
| Output Current | 200mA |
| Max Supply Current | 5.2mA |
| Quiescent Current | 3.6mA |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 65V |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 50mA~250mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 60μA |
| Low Level Output Current | 56μA |
| Number of Segments | 6 |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
LM3492MH/NOPB Overview
To save space on the board, it has a 20-PowerTSSOP (0.173, 4.40mm Width) package. In this LED driver, there are 2 outputs.Mounting is done according to the Surface Mount method.It emerges as a DC DC Regulator with high efficiency.It is capable of operating at a temperature of -40°C~125°C TA. There are considerable benefits for Backlight.As a result, it operates based on the frequency of 200kHz~1MHz.There are 20 terminations associated with it.There are 20 pins used to form the base of its configuration.6 segments are present.It's mounted by Surface Mount.LED drivers can be found under the base part number LM3492.It is acceptable to supply voltages of 65V.Furthermore, it can be classified as Display Drivers based on its characteristics.It operates at a voltage of 4.5V as its minimal input voltage.To meet the highest efficiency standards, it can be operated with a minimum supply voltage of 4.5V.When the maximum supply current is allowed, the value reaches 65V.When the maximum supply current is below 5.2mA, it is capable of delivering high efficiency.It is possible to supply the load with 200mA current.The electronic component can fully perform its functions if the switching frequency is maintained at 1MHz.In the absence of external factors, 3.6mA current is consumed.65V is the voltage at the output terminal.
LM3492MH/NOPB Features
Available in the 20-PowerTSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 200kHz~1MHz
Supply voltage of 12V
Switching frequency of 1MHz
Output voltage of 65V
LM3492MH/NOPB Applications
There are a lot of Texas Instruments LM3492MH/NOPB LED Driver ICs applications.
- OLED power supply for portable equipment
- Flicker-free LED Lighting using R1580N
- Linear fluorescent
- A- lamps
- Refrigeration lighting
- Other Electronic Devices
- General lighting
- Architectural lighting
- Panel lighting
- White LED Backlight for portable equipment
