LM3495MTCX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ADJUSTABLE OUTPUT MODE FROM 0.6 TO 5.5V |
| Subcategory | Switching Regulator or Controllers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM3495 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 2.9V~18V |
| Quiescent Current | 1.8mA |
| Control Features | Current Limit, Frequency Control, Tracking |
| Input Voltage (Min) | 2.9V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~1.5MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1.5MHz |
| Duty Cycle (Max) | 96% |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3495MTCX/NOPB Overview
In the 16-TSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. The dc motor controller is adquate to generate for 1 outputs. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. It is capable of handling Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 2.9V~18V. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. The switching controller is capable of switching at the 200kHz~1.5MHz position. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Current Limit, Frequency Control, Tracking is included in the dcdc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Switching converters are designed with the terminal (s) at position DUAL . Various 16 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. A DC switcher's nominal voltage of 12V is input. Search for "LM3495" to find other relevant dc to dc converter ics. Switching converter has a total of 16 pins. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 2.9V. DC regulator outputs 5.5V voltage according to the test statistics. You should note that the dc dc regulator's usual output current is 10A. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. The max frequency of the pmic can reach 1.5MHz. For better satisfaction, the value of DC to DC voltage regulator is ADJUSTABLE OUTPUT MODE FROM 0.6 TO 5.5V. During dormancy, the dc switching uses 1.8mA.
LM3495MTCX/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz~1.5MHz
Current Limit, Frequency Control, Tracking
PULSE WIDTH MODULATION
ADJUSTABLE OUTPUT MODE FROM 0.6 TO 5.5V
LM3495MTCX/NOPB Applications
There are a lot of Texas Instruments LM3495MTCX/NOPB DC to DC converter applications.
- Remotely powered electric motors
- Handheld GPS
- Automation technology
- Wind power
- Photovoltaic power
- Laboratories
- Electric water heaters
- Medical equipment
- Die casting equipment
- Pipe bending machines
