LM3502ITL-35/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFBGA, DSBGA |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM3502 |
| Number of Outputs | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Output Current | 750mA |
| Max Supply Current | 3mA |
| Quiescent Current | 1.9mA |
| Voltage - Output | 35V |
| Topology | Step-Up (Boost) |
| Current - Output / Channel | 750mA Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Switching Frequency | 1MHz |
| Voltage - Supply (Min) | 2.5V |
| Width | 1.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LM3502ITL-35/NOPB Overview
In order to save board space, the led driver uses the 10-WFBGA, DSBGA package. LED drivers design with 2 outputs.The mounting method adopted is Surface Mount.It is highly performing and reliable when it emerges as a DC DC Regulator.LED drivers capable of operating at -40°C~85°C TA can be used.Backlight has many advantages.There are 10 pins used to form the base of its configuration.If the voltage supply is less than 2.5V, undetermined failures will occur.It's mounted in Surface Mount.It is under the base part number LM3502 that you can find this LED driver.It is acceptable for the supply voltage to be 5.5V.A voltage of 35V is produced by it.It is designed to operate at a minimal voltage of 2.5V to achieve the highest efficiency.When the maximum supply current is below 3mA, the device can deliver high efficiency.The current that can be supplied to the load is 750mA.When the switching frequency is maintained at 1MHz, this electronic component is able to fully play its functions.When no external factors are present, there is 1.9mA current consumption.
LM3502ITL-35/NOPB Features
Available in the 10-WFBGA, DSBGA package
Operating temperature of -40°C~85°C TA
Switching frequency of 1MHz
LM3502ITL-35/NOPB Applications
There are a lot of Texas Instruments LM3502ITL-35/NOPB LED Driver ICs applications.
- Stage Lighting and Signage
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Stage and Studio lighting
- High-end retail lighting
- Architectural lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Down lighting
- LED headlights
- Dimmable LED for vehicle interiors
- General lighting
