LM3503ITL-25/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFBGA, DSBGA |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM3503 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Output Current | 800mA |
| Max Supply Current | 3mA |
| Quiescent Current | 1.9mA |
| Voltage - Output | 25V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 5.5V |
| Current - Output / Channel | 600mA Switch |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Number of Segments | 10 |
| Switching Frequency | 1MHz |
| Height Seated (Max) | 0.6mm |
| Width | 1.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LM3503ITL-25/NOPB Overview
Additionally, there is a 10-WFBGA, DSBGA package for saving space.Typically, LED drivers have 2 outputs.To mount, use Surface Mount.In this case, it emerges as a DC DC Regulator with a high efficiency.If the led driver ic is set to -40°C~85°C TA, it will work normally.There are many benefits for Backlight.10 terminations are designed for its operation.There are 16 pins on the base of this LED driver.10 segments exist.It's mounted by Surface Mount.A base part number of LM3503 is associated with this LED driver.5.5V is an acceptable voltage.This device has an output voltage of 25V volts.This device contains 10 pins.Depending on its characteristics, it is classified into Display Drivers.A minimal input voltage of 2.5V is required for it to operate.For highest efficiency, it works with a minimal supply voltage of 2.5V.There is 5.5V maximum value for supply current.Whenever the supply current is lower than 3mA, it can provide high efficiency.A load can be supplied with 800mA current.The electronic component can function fully when the switching frequency is maintained at 1MHz.A current of 1.9mA is consumed in the absence of external influences.
LM3503ITL-25/NOPB Features
Available in the 10-WFBGA, DSBGA package
Operating temperature of -40°C~85°C TA
Switching frequency of 1MHz
LM3503ITL-25/NOPB Applications
There are a lot of Texas Instruments LM3503ITL-25/NOPB LED Driver ICs applications.
- Dimmable LED for vehicle interiors
- Gallery lighting
- Architectural lighting
- A- lamps
- Auxiliary lights for on-vehicle cameras
- Linear fluorescent
- Museum lighting
- Constant Voltage Power Source for portable equipment
- Stage Lighting and Signage
- Other Electronic Devices
