LM3503ITL-35/NOPB
| Parameters | |
|---|---|
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM3503 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Output Current | 1.05A |
| Max Supply Current | 3mA |
| Quiescent Current | 1.9mA |
| Voltage - Output | 35V |
| Topology | Step-Up (Boost) |
| Current - Output / Channel | 750mA Switch |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Number of Segments | 2 |
| Switching Frequency | 1MHz |
| Voltage - Supply (Min) | 2.5V |
| Height Seated (Max) | 0.6mm |
| Width | 1.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFBGA, DSBGA |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
LM3503ITL-35/NOPB Overview
To save board space, it uses the 10-WFBGA, DSBGA package. LED drivers use 2 outputs for their design.Surface Mount is used for mounting the led light driver.With high efficiency and reliable performance, it emerges as a DC DC Regulator.It is possible for the led driver ic to operate normally at -40°C~85°C TA.The benefits of Backlight are considerable.There are 10 terminations that are designed to operate with it.This LED driver is configured with a base of 10 pins.Under 2.5V voltage supply, undetermined failures may occur.The number of segments is estimated to be 2.It is mounted in the way of Surface Mount.Under the base part number LM3503, you'll find this LED driver.An acceptable maximum value for the supply voltage is 5.5V.The output voltage of the device is 35V.On this device, there are 10 pins.In addition to Display Drivers, it is also classified by its characteristics.It is designed to operate at a minimal voltage of 2.5V to achieve the highest efficiency.When the maximum supply current is below 3mA, the device can deliver high efficiency.The load is capable of receiving 1.05A current.The electronic component can function fully when the switching frequency is maintained at 1MHz.There is no external factor that can consume current, so 1.9mA current is consumed.
LM3503ITL-35/NOPB Features
Available in the 10-WFBGA, DSBGA package
Operating temperature of -40°C~85°C TA
Switching frequency of 1MHz
LM3503ITL-35/NOPB Applications
There are a lot of Texas Instruments LM3503ITL-35/NOPB LED Driver ICs applications.
- Constant Voltage Power Source for portable equipment
- Street lighting
- Flicker-free LED Lighting using R1580N
- Replacement lamps
- LED backlight driver for LCD displays for portable equipment
- Stage and Studio lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Dimmable LED for vehicle interiors
- Sports Facility Lighting
- Industrial LED Lighting: Image Recognition Devices
