LM3519MK-20
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.95mm |
| Frequency | 5.4MHz |
| Base Part Number | LM3519 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 900μA |
| Output Current | 20mA |
| Max Supply Current | 900μA |
| Quiescent Current | 550μA |
| Voltage - Output | 20V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 4 |
| Switching Frequency | 8MHz |
| Multiplexed Display Capability | NO |
| Length | 2.97mm |
| Width | 1.65mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM3519MK-20 Overview
Additionally, there is a SOT-23-6 Thin, TSOT-23-6 package for saving space.This LED driver has 1 outputs.As a mounting method, Surface Mount is used.There is no doubt that this is a very efficient and reliable DC DC Regulator.-40°C~85°C TA is the operating temperature for the led light driver.As a result, Backlight is likely to benefit greatly.Frequency 5.4MHz is the basis of operation.There are 6 terminations that are designed to operate with it.It is configured with 6 pins as its base.It consists of 4 segments.I have mounted it by Surface Mount.This LED driver can be found under the base part number LM3519.It is acceptable to supply voltages of 5.5V volts.There is 20V voltage output from it.There are 6 pins on this device.In addition, it can be classified as Display Drivers according to its characteristics.At a voltage of 2.7V, it operates at a minimal input voltage.This system is designed to operate at a minimum voltage of 2.7V to achieve maximum efficiency.The maximum supply current is reached when 5.5V is reached.When the maximum supply current is below 900μA, it is capable of delivering high efficiency.There is no current that can be supplied to the load.The electronic component can fully perform its functions if the switching frequency is maintained at 8MHz.No external factors cause 550μA current to be consumed.
LM3519MK-20 Features
Available in the SOT-23-6 Thin, TSOT-23-6 package
Operating temperature of -40°C~85°C TA
Frequency of 5.4MHz
Supply voltage of 3.6V
Switching frequency of 8MHz
LM3519MK-20 Applications
There are a lot of Texas Instruments LM3519MK-20 LED Driver ICs applications.
- Refrigeration lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- OLED power supply for portable equipment
- Medical surgery lighting
- LED headlights
- Auxiliary lights for on-vehicle cameras
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Amusement Machines
- Museum lighting
- Street lighting
