LM3525MX-H/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LM3525 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Interface | On/Off |
| Nominal Supply Current | 65μA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Quiescent Current | 1μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 200 μs |
| Switch Type | USB Switch |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Output Characteristics | OPEN-DRAIN |
| Turn-Off Delay Time | 20 μs |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3525MX-H/NOPB Overview
It is package in Tape & Reel (TR) case.In the 8-SOIC (0.154, 3.90mm Width) package, it is included.The lighting driver is mounted in the Surface Mount position.The switch type of this switch is USB Switch.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.By default, it is set to output 1.Operation is based on Not Required supply voltage.There is a maximum output voltage of P-Channel volts on this LED driver.Features of the lighting driver are Status Flag.This object belongs to the LM3525 family.The termination count is 8.In order to operate, the 8 pins are used.As far as the lighting driver is concerned, there are 1 functions.High efficiency is possible at 5V supply voltage.This lighting driver is mounted in the way of Surface Mount.As a result, it has a total of 8 pins.120mOhm is the resistance of the lighting driver.This case results in a 500mA output current.Input voltage is limited to 5.5V volts.The input voltage minimum is 2.7V volts.
LM3525MX-H/NOPB Features
Supplied from 5V
Resistance of 120mOhm
LM3525MX-H/NOPB Applications
There are a lot of Texas Instruments LM3525MX-H/NOPB Power Switches ICs applications.
- PC Card Hot Swap
- USB Power Distribution
- Portable Music Players
- Gaming
- Solid State Drivers
- Hard Disk Drives
- HDD and SSD
- Telecom and Network Systems
- Notebook and Tablet Computers
- Set-top-box
