LM3525MX-L/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LM3525 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Nominal Supply Current | 65μA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Quiescent Current | 1μA |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Output Characteristics | OPEN-DRAIN |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3525MX-L/NOPB Overview
Tape & Reel (TR) is the way it's packaged.There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.Surface Mount is the mounting type of the LED driver.It owns USB Switch switch type.To ensure reliable operation, set the temperature to -40°C~85°C TA.By default, it is set to output 1.A supply voltage of Not Required is required for it to operate.The maximum output voltage of this LED driver is P-Channel volts.It has a total of Status Flag features.As you can see, it comes from the LM3525 family.A total of 8 terminations have been recorded.The operation is performed through the 8 pins.There are 1 functions of the LED driver.To comply with the operation criteria, the maximum output current is reduced to 500mA.The supply voltage of 5V is conducive to high efficiency.Surface Mount is mounted in the way of this LED driving board.As a result, it has a total of 8 pins.This results in a 500mA output current.Vsup (maximum supply voltage) is set to 5.5V.In order to operate normally, the supply voltage (Vsup) must be maintained above 2.7V.
LM3525MX-L/NOPB Features
Supplied from 5V
LM3525MX-L/NOPB Applications
There are a lot of Texas Instruments LM3525MX-L/NOPB Power Switches ICs applications.
- Handheld Devices
- Set-top-box
- Wireless Headsets
- Mobile Communication Devices
- Various applications equipped with buttons
- PC Card Hot Swap
- Notebook and Tablet Computers
- USB3.1 Power Delivery
- Gaming
- USB Power Distribution
