banner_page

LM3526M-H

P-Channel PMIC LM3526 8 Pin 5V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LM3526M-H
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 830
  • Description: P-Channel PMIC LM3526 8 Pin 5V 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~125°C TJ
Packaging Tube
JESD-609 Code e0
Feature Status Flag
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 100mOhm
Terminal Finish Tin/Lead (Sn/Pb)
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 235
Number of Functions 1
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number LM3526
Pin Count 8
Number of Outputs 2
Output Type P-Channel
Supply Voltage-Max (Vsup) 5.5V
Interface On/Off
Output Configuration High Side
Output Current 500mA
Voltage - Supply (Vcc/Vdd) Not Required
Quiescent Current 1μA
Input Type Non-Inverting
Switch Type USB Switch
Output Characteristics OPEN-DRAIN
Ratio - Input:Output 1:2
Input Characteristics STANDARD
Voltage - Load 2.7V~5.5V
Driver Number of Bits 2
Fault Protection Current Limiting (Fixed), Over Temperature, UVLO
Output Peak Current Limit-Nom 1.2A
Rds On (Typ) 100m Ω
Built-in Protections TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

LM3526M-H Overview


A Tube is used to package it.This package is included in 8-SOIC (0.154, 3.90mm Width).In this case, the LED driving board is mounted as Surface Mount.The switch type is USB Switch.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.The LED driver has 2 outputs.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of P-Channel volts can be achieved by this LED driver.It has a total of Status Flag features.It is a member of the LM3526 family.As a result, there are 8 terminations.In order to operate, the 8 pins are used.The LED driver has 1 functions.As long as the supply voltage is 5V, high efficiency can be achieved.It is positioned in the direction of Surface Mount.A total of 8 pins are present on it.100mOhm is the resistance of the lighting driver.When this case is used, the output current is set to 500mA.A maximum supply voltage of 5.5V is set in Vsup.

LM3526M-H Features


Supplied from 5V
Resistance of 100mOhm

LM3526M-H Applications


There are a lot of Texas Instruments LM3526M-H Power Switches ICs applications.

  • Solid State Drivers
  • Gaming
  • Hot-Swap Systems
  • Portable GPS
  • Wireless/Networking Cards
  • Wireless Modem Data Cards
  • Storage (HDDs, SSDs)
  • Notebook PC
  • Mobile Communication Devices
  • Low Voltage I/O System Power

Write a review

Note: HTML is not translated!
    Bad           Good