LM3526M-H/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 700mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LM3526 |
| Pin Count | 8 |
| Output Voltage | 6V |
| Output Type | P-Channel |
| Interface | On/Off |
| Current - Output (Max) | 500mA |
| Number of Ports | 2 |
| Nominal Supply Current | 1μA |
| Output Configuration | High Side |
| Power Dissipation | 700mW |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Quiescent Current | 1μA |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Output Characteristics | OPEN-DRAIN |
| Nominal Input Voltage | 5V |
| Ratio - Input:Output | 1:2 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Input Current | 115μA |
| Output Peak Current Limit-Nom | 1.2A |
| Rds On (Typ) | 100m Ω |
| USB | USB 1.1 |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3526M-H/NOPB Overview
Tube is how it's packaged.This file is included in package 8-SOIC (0.154, 3.90mm Width).It has been mounted as Surface Mount on the LED driver.USB Switch is the switch type that it owns.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.A supply voltage of Not Required is required for it to operate.A maximum output voltage of P-Channel volts has been specified.Status Flag features are available on the lighting driver.It is a member of the LM3526 family.It contains 8 terminations.The 8 pins are used to operate the LED driver.As far as functions are concerned, the lighting driver has 1.This LED driver has a maximum output of 500mAV.Using a voltage of 5V allows for high efficiency.The LED driving board is mounted in the way of Surface Mount.In total, it has 8 pins.This results in a 500mA output current.The maximum input voltage of the LED driver is 5.5V volts.There is a minimum input voltage of 2.7V volts for this LED driver.
LM3526M-H/NOPB Features
Supplied from 5V
LM3526M-H/NOPB Applications
There are a lot of Texas Instruments LM3526M-H/NOPB Power Switches ICs applications.
- PC Cards
- USB Power Distribution
- PDAs
- Hot Swap
- HDD and SSD
- Mobile Communication Devices
- Solid-State Drives
- Storage (HDDs, SSDs)
- HDD, SSD
- Hot Swaps
