LM3526MX-L/NOPB
| Parameters | |
|---|---|
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 1.2A |
| Rds On (Typ) | 100m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LM3526 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Interface | On/Off |
| Nominal Supply Current | 1μA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Quiescent Current | 1μA |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Output Characteristics | OPEN-DRAIN |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
LM3526MX-L/NOPB Overview
The package is in the form of a Tape & Reel (TR).It's included in the 8-SOIC (0.154, 3.90mm Width) package.A Surface Mount mounting is used for the LED driving board.It owns USB Switch switch type.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.The LED driver has a total of 2 outputs.It uses a supply voltage of Not Required to operate.A maximum output voltage of P-Channel volts can be achieved by this LED driver.Features of the lighting driver are Status Flag.The LM3526 family consists of this type.It consists of 8 terminations in total.The 8 pins are used for the operation of the system.It contains 1 functions.This results in the maximum output current dropping to 500mA to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 5V.As a result, it is mounted in the manner of Surface Mount.A total of 8 pins are included in this LED driver.It is set to 500mA in this case.Its maximum input voltage is 5.5V volts.There is a minimum input voltage of 2.7V volts for this LED driver.
LM3526MX-L/NOPB Features
Supplied from 5V
LM3526MX-L/NOPB Applications
There are a lot of Texas Instruments LM3526MX-L/NOPB Power Switches ICs applications.
- USB Protection
- Hard Disk Drives
- PC Card Hot Swap
- Storage (HDDs, SSDs)
- Mobile Communication Devices
- Smart Phones, Feature Phones
- Solid State Drivers
- HDD, SSD
- Portable Devices
- Various applications equipped with buttons
