LM3530TME-40/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFBGA |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LM3530 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Nominal Supply Current | 1.35mA |
| Quiescent Current | 1.35mA |
| Voltage - Output | 40V |
| Topology | Step-Up (Boost) |
| Output Current per Channel | 30mA |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 10 |
| Switching Frequency | 500kHz |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 675μm |
| Length | 0m |
| Width | 0m |
| Thickness | 420μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3530TME-40/NOPB Overview
Using its 12-WFBGA package, it is possible to save board space. LED drivers designed using this technology use 1 outputs.The led driver mounting is done by using Surface Mount.It emerges as a DC DC Regulator with high efficiency.The led light driver operates normally at -40°C~85°C TA. There are considerable benefits for Backlight.A termination of 12 is used to operate the LED driver.This LED driver is configured with a base of 12 pins.Undetermined failures may occur if the voltage supply falls below 2.7V.10 segments exist.It has been mounted on Surface Mount.This LED driver has the part number LM3530.It is acceptable for the voltage to be 5.5V.There is 40V voltage output from the device.Further, its characteristics allow it to be classified as Display Drivers.This electronic component may perform its functions fully if the switching frequency is maintained at 500kHz.When no external factors are present, there is 1.35mA current consumption.
LM3530TME-40/NOPB Features
Available in the 12-WFBGA package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 500kHz
LM3530TME-40/NOPB Applications
There are a lot of Texas Instruments LM3530TME-40/NOPB LED Driver ICs applications.
- LED Lighting PFCs, Linear Dimmable
- Industrial LED Lighting: Image Recognition Devices
- LED headlights
- Flicker-free LED Lighting using R1580N
- A- lamps
- Constant Voltage Power Source for portable equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Medical surgery lighting
- Museum lighting
- Sports Facility Lighting
