LM3530UME-25A/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-XFBGA |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | I2C |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Base Part Number | LM3530 |
| Number of Outputs | 1 |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 1.35mA |
| Output Current | 20mA |
| Max Supply Current | 1.35mA |
| Quiescent Current | 1.35mA |
| Voltage - Output | 40V |
| Topology | Step-Up (Boost) |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 30mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 11 |
| Switching Frequency | 500kHz |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 470μm |
| Length | 0m |
| Width | 0m |
| Thickness | 400μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3530UME-25A/NOPB Overview
Using its 12-XFBGA package, it is possible to save board space. In LED drivers, the outputs are all set to 1.The mounting method is Surface Mount.Initially, it emerges as a DC DC Regulator with high efficiency and a high degree of reliability.It is capable of working normally at -40°C~85°C TA.The benefits are considerable for Backlight.In this case, there are 12 terminations.There are 12 pins used to form the base of its configuration.A voltage supply below 2.7V may cause undetermined failures.There are 11 segments.Surface Mount is mounted in the way.Under the base part number LM3530, you'll find this LED driver.It is acceptable to supply voltages of 5.5V volts.It has a voltage output of 40V.Furthermore, it can be classified as Display Drivers based on its characteristics.This system is designed to operate at a minimum voltage of 2.7V to achieve maximum efficiency.The device can deliver high efficiency when the maximal supply current is less than 1.35mA.A load can be supplied with 20mA current.The electronic component can fully perform its functions if the switching frequency is maintained at 500kHz.A current of 1.35mA is consumed in the absence of external influences.
LM3530UME-25A/NOPB Features
Available in the 12-XFBGA package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 500kHz
LM3530UME-25A/NOPB Applications
There are a lot of Texas Instruments LM3530UME-25A/NOPB LED Driver ICs applications.
- LED backlight driver for LCD displays for portable equipment
- General lighting
- Down lights
- Replacement lamps
- Stage and Studio lighting
- Other Electronic Devices
- Sports Facility Lighting
- A- lamps
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Flicker-free LED Lighting using R1580N
