LM3532TME-40A/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFBGA, DSBGA |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Frequency | 500kHz |
| Base Part Number | LM3532 |
| Number of Outputs | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Output Current | 20mA |
| Max Supply Current | 1.35mA |
| Voltage - Output | 40V |
| Topology | Step-Up (Boost) |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 30mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 30 |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 675μm |
| Length | 0m |
| Width | 0m |
| Thickness | 420μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3532TME-40A/NOPB Overview
In order to save board space, the led driver uses the 16-WFBGA, DSBGA package. Using this LED driver, there are 3 outputs.To mount, use Surface Mount.With high efficiency, it emerges as a DC DC Regulator.It is possible for the led driver ic to function normally at -40°C~125°C TJ.It is clear that Backlight will benefit from the program.The frequency of 500kHz determines how it operates.It operates with 16 terminations.To form its configuration, 16 pins are used.Undetermined failures can occur if the voltage supply is below 2.7V.There are 30 segments.There is a mounting of it by Surface Mount.LM3532 is the base part number for the LED driver.The supply voltage of 5.5V is an acceptable maximum value.A voltage of 40V is produced by it.According to its characteristics, it is also categorized into Display Drivers.The maximum efficiency can be achieved by operating it at a minimal voltage of 2.7V.As long as the maximum supply current is less than 1.35mA, this device is capable of providing high efficiency.A load can be supplied with 20mA current.
LM3532TME-40A/NOPB Features
Available in the 16-WFBGA, DSBGA package
Operating temperature of -40°C~125°C TJ
Frequency of 500kHz
Supply voltage of 3.6V
LM3532TME-40A/NOPB Applications
There are a lot of Texas Instruments LM3532TME-40A/NOPB LED Driver ICs applications.
- LED Lightings for Industrial Equipment
- Stage Lighting and Signage
- Refrigeration lighting
- Linear fluorescent
- Auxiliary lights for on-vehicle cameras
- Amusement Machines
- Other Electronic Devices
- High-end retail lighting
- General lighting
- Panel lighting
