LM3533TME-40/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFBGA |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Frequency | 500kHz 1MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LM3533 |
| Number of Outputs | 7 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.6V |
| Max Supply Voltage | 5.5V |
| Quiescent Current | 1.4mA |
| Voltage - Output | 40V |
| Topology | Step-Up (Boost), Switched Capacitor (Charge Pump) |
| Output Current per Channel | 30mA |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 30mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 25 |
| Switching Frequency | 500kHz |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 675μm |
| Length | 0m |
| Width | 0m |
| Thickness | 420μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3533TME-40/NOPB Overview
There is also a 20-WFBGA package that is used to save space on the board. LED drivers use 7 outputs for their design.As far as mounting is concerned, Surface Mount is adopted.The system emerges as a DC DC Regulator with high efficiency.-40°C~125°C TJ is the operating temperature and it works fine.A number of benefits are available to Backlight.A frequency of 500kHz 1MHz is used as the basis for operation.It operates with terminations of 20.A configuration of this chip is made up of 20 pins.Failures may occur if the voltage supply is below 2.7V.A total of 25 segments are estimated.On the Surface Mount, a device is mounted.The LED driver is available under the part number LM3533.As a maximum value, 5.5V is acceptable.Its output voltage is 40V.As a result, it can also be classified as Display Drivers.When the switching frequency is maintained at 500kHz, this electronic component is able to fully play its functions.When no external factors are present, there is 1.4mA current consumption.
LM3533TME-40/NOPB Features
Available in the 20-WFBGA package
Operating temperature of -40°C~125°C TJ
Frequency of 500kHz 1MHz
Supply voltage of 3.6V
Switching frequency of 500kHz
LM3533TME-40/NOPB Applications
There are a lot of Texas Instruments LM3533TME-40/NOPB LED Driver ICs applications.
- Panel lighting
- Street lighting
- High-end retail lighting
- LED Lightings for Inspection Devices
- LED backlight driver for LCD displays for Tablets and Note PCs
- Other Electronic Devices
- Refrigeration lighting
- Scanners and Handy Terminals
- Auxiliary lights for on-vehicle cameras
- Portable lighting
