LM3535TME-2ALS/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFBGA |
| Number of Pins | 20 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Base Part Number | LM3535 |
| Number of Outputs | 8 |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 1.09mA |
| Output Current | 25mA |
| Max Supply Current | 4.38mA |
| Quiescent Current | 1.09mA |
| Voltage - Output | 2V~4V |
| Topology | Switched Capacitor (Charge Pump) |
| Internal Switch(s) | Yes |
| High Level Output Current | -25mA |
| Low Level Output Current | 25mA |
| Dimming | PWM |
| Number of Segments | 8 |
| Switching Frequency | 1.33MHz |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Touchscreen | Capacitive |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 0.675mm |
| Length | 2.015mm |
| Width | 1.61mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LM3535TME-2ALS/NOPB Overview
Its 20-WFBGA package is used to save board space. LED drivers designed using this technology use 8 outputs.For mounting, it uses the Surface Mount method.It is highly reliable and high-performing when it emerges as a DC DC Regulator.At -30°C~85°C TA, the led driver is capable of operating.Backlight has many advantages.There are 20 terminations associated with it.There are 20 pins on the base of this LED driver.It is inevitable that there will be undetermined failures when the supply voltage is less than 2.7V.There are 8 segments.It's mounted on the way to Surface Mount.LM3535 is the base part number for the LED driver.There is no maximum value acceptable for the supply voltage, so 5.5V is acceptable.It has a voltage output of 2V~4V.As a result, it can also be classified as Display Drivers.For highest efficiency, it works with a minimal supply voltage of 2.7V.Its high efficiency is based on the fact that the maximal supply current should not exceed 4.38mA.You can supply 25mA current to the load.As long as the switching frequency is maintained at 1.33MHz, this electronic component is able to perform all of its functions properly.1.09mA current is consumed in the case of no external factors.
LM3535TME-2ALS/NOPB Features
Available in the 20-WFBGA package
Operating temperature of -30°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1.33MHz
LM3535TME-2ALS/NOPB Applications
There are a lot of Texas Instruments LM3535TME-2ALS/NOPB LED Driver ICs applications.
- Scanners and Handy Terminals
- Constant Voltage Power Source for portable equipment
- OLED power supply for portable equipment
- Portable lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- LED backlight driver for LCD displays for portable equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Down lighting
- Replacement lamps
- Other Electronic Devices
