LM3535TMX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFBGA |
| Number of Pins | 20 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Base Part Number | LM3535 |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 1.09mA |
| Max Supply Current | 1.09mA |
| Quiescent Current | 1.09mA |
| Voltage - Output | 2V~4V |
| Topology | Switched Capacitor (Charge Pump) |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 25mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 8 |
| Switching Frequency | 1.33MHz |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Touchscreen | Capacitive |
| Data Input Mode | SERIAL |
| Height | 675μm |
| Length | 0m |
| Width | 0m |
| Thickness | 420μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3535TMX/NOPB Overview
As a result of its 20-WFBGA package, it helps to save board space on the board. The led light driver is mounted using Surface Mount.As a result, it appears as a DC DC Regulator with a high efficiency and a high degree of reliability.The LED driver has the capability of operating at a temperature of -30°C~85°C TA.Backlight has many benefits.In order for it to operate, it has 20 terminations.Its configuration is based on 20 pins.Undetermined failures may occur when the voltage supply is less than 2.7V.A total of 8 segments are estimated.On the Surface Mount, a device is mounted.The LED driver is available under the part number LM3535.Ideally, the supply voltage should be 5.5V.It produces a voltage of 2V~4V volts.In addition to Display Drivers, it is also classified by its characteristics.The system works with a minimum supply voltage of 2.7V in order to achieve maximum efficiency.Its high efficiency is based on the fact that the maximal supply current should not exceed 1.09mA.This electronic component can fully perform its functions when the switching frequency is kept at 1.33MHz.The consumption of current is 1.09mAin the absence of external factors.
LM3535TMX/NOPB Features
Available in the 20-WFBGA package
Operating temperature of -30°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1.33MHz
LM3535TMX/NOPB Applications
There are a lot of Texas Instruments LM3535TMX/NOPB LED Driver ICs applications.
- Medical surgery lighting
- LED Lightings for Inspection Devices
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Replacement lamps
- Museum lighting
- General lighting
- Amusement Machines
- A- lamps
- High-end retail lighting
