LM3551SDX/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-WFDFN Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Camera Flash |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM3551 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Efficiency | 93 % |
| Output Voltage | 12.4V |
| Max Output Current | 1A |
| Power Supplies | 3/5V |
| Nominal Supply Current | 1.47mA |
| Output Current | 1A |
| Quiescent Current | 1.47mA |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Current - Output / Channel | 1A Flash |
| Internal Switch(s) | Yes |
| Number of Segments | 4 |
| Switching Frequency | 1.25MHz |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LM3551SDX/NOPB Overview
The 14-WFDFN Exposed Pad package is used for saving board space. For the design of these LED drivers, 1 outputs are used.Surface Mount is used for mounting.DC DC Regulator emerges with high efficiency and reliability.This LED driver can be operated at a temperature of -40°C~85°C TA. There are significant benefits for Camera Flash.It operates with terminations of 14.It has a base configuration of 14 pins.The segment count is 4.There is a device mounted on the Surface Mount.Part number LM3551 represents this LED driver.14 pins are on the device.Further, it can be classified as Display Drivers based on its characteristics.This device requires a minimum input voltage of 2.7V.There is 5.5V maximum value for supply current.There is no current available to supply to the load.As long as the switching frequency is maintained at 1.25MHz, this electronic component is able to perform all of its functions properly.A LED driver that operates at 1A output current provides all the benefits of a LED driver.There is no external factor that consumes current when there is 1.47mA current consumption.It has a voltage of 12.4V.
LM3551SDX/NOPB Features
Available in the 14-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1.25MHz
Output voltage of 12.4V
LM3551SDX/NOPB Applications
There are a lot of Texas Instruments LM3551SDX/NOPB LED Driver ICs applications.
- Refrigeration lighting
- High-end retail lighting
- Museum lighting
- General lighting
- Dimmable LED for vehicle interiors
- LED Lightings for Inspection Devices
- Gallery lighting
- Panel lighting
- OLED power supply for portable equipment
- Other Electronic Devices
