LM3552SD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-WFDFN Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | Camera Flash |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM3552 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Efficiency | 93 % |
| Output Voltage | 12.4V |
| Max Output Current | 1A |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 1.47mA |
| Output Current | 1A |
| Quiescent Current | 1.47mA |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Current - Output / Channel | 1A Flash |
| Internal Switch(s) | Yes |
| Number of Segments | 2 |
| Switching Frequency | 1.25MHz |
| Multiplexed Display Capability | YES |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM3552SD Overview
To save board space, it uses the 14-WFDFN Exposed Pad package. A LED driver using this design has 1 outputs.Mounting is done according to the Surface Mount method.With high reliability and efficiency, this emerges as a DC DC Regulator.If the led driver ic is set to -40°C~85°C TA, it will work normally.Camera Flash benefits significantly from the program.There are 14 terminations associated with it.To form its configuration, there are 14 pins.In total, it includes 2 segments.It's mounted on the way to Surface Mount.It is under the base part number LM3552 that the LED driver can be found.It is acceptable for the voltage to be 5.5V.The device has 14 pins.Further, its characteristics allow it to be classified as Display Drivers.A minimal input voltage of 2.7V is required for it to operate.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 2.7V.There is 5.5V maximum value for supply current.The current that can be supplied to the load is 1A.Electronic components can function properly when their switching frequency is set to 1.25MHz.When operating with a maximum output current of 1A, it can deliver all the benefits of a LED driver.No external factors cause 1.47mA current to be consumed.A 12.4V voltage is output by it.
LM3552SD Features
Available in the 14-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1.25MHz
Output voltage of 12.4V
LM3552SD Applications
There are a lot of Texas Instruments LM3552SD LED Driver ICs applications.
- Architectural lighting
- Industrial LED Lighting: Image Recognition Devices
- LED Lightings for Inspection Devices
- Down lighting
- Gallery lighting
- High-end retail lighting
- OLED power supply for portable equipment
- Stage and Studio lighting
- White LED Backlight for portable equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
