LM3553SDX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFDFN Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | I2C, OVP |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight, Camera Flash |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Frequency | 1.2MHz |
| Base Part Number | LM3553 |
| Pin Count | 12 |
| Number of Outputs | 1 |
| Power Supplies | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 1mA |
| Output Current | 1.2A |
| Quiescent Current | 1mA |
| Topology | Step-Up (Boost) |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 1.2A Flash |
| Internal Switch(s) | Yes |
| Dimming | I2C |
| Number of Segments | 2 |
| Switching Frequency | 1.25MHz |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3553SDX/NOPB Overview
In order to save board space, the 12-WFDFN Exposed Pad package is used. LED drivers have a total of 1 outputs that are used in the design of the drivers.Surface Mount is used to mount the led light driver.When it emerges as a DC DC Regulator, it performs extremely well and is highly reliable.This LED driver can be operated at a temperature of -30°C~85°C TA. Taking advantage of Backlight, Camera Flash has considerable benefits.1.2MHz is the frequency in which it operates.In this case, it operates with terminations of 0.With 12 pins at the base, this LED driver has a base configuration.There may be undetermined failures if the voltage supply falls below 2.7V.The number of segments is estimated to be 2.The mount is in the direction of Surface Mount.Under the base part number LM3553, you'll find this LED driver.It is acceptable to operate with a supply voltage of 5.5V.The device has 12 pins.Furthermore, it can be classified as Display Drivers based on its characteristics.With a minimal supply voltage of 2.7V, it reaches the highest efficiency levels.Loads can only be powered by 1.2A current.This electronic component can fully perform its functions when the switching frequency is kept at 1.25MHz.When no external factors are present, there is 1mA current consumption.
LM3553SDX/NOPB Features
Available in the 12-WFDFN Exposed Pad package
Operating temperature of -30°C~85°C TA
Frequency of 1.2MHz
Supply voltage of 3.6V
Switching frequency of 1.25MHz
LM3553SDX/NOPB Applications
There are a lot of Texas Instruments LM3553SDX/NOPB LED Driver ICs applications.
- Stage and Studio lighting
- Industrial LED Lighting: Image Recognition Devices
- Sports Facility Lighting
- Down lighting
- LED headlights
- Constant Voltage Power Source for portable equipment
- A- lamps
- Stage Lighting and Signage
- Architectural lighting
- Medical surgery lighting
