LM3560TLE-20/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFBGA, DSBGA |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Camera Flash |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 2MHz |
| Base Part Number | LM3560 |
| Max Output Current | 2A |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Quiescent Current | 900μA |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Output Current per Channel | 1A |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 1A Flash |
| Internal Switch(s) | Yes |
| fmax-Min | 0.4 MHz |
| Dimming | I2C |
| Number of Segments | 2 |
| Switching Frequency | 2kHz |
| Multiplexed Display Capability | NO |
| Nominal Input Voltage (DC) | 3.6V |
| Height | 675μm |
| Length | 2.5mm |
| Width | 2.3mm |
| Thickness | 675μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3560TLE-20/NOPB Overview
Space is saved using its 16-WFBGA, DSBGA package. Mounting is done according to the Surface Mount method.It is highly reliable and high-performing when it emerges as a DC DC Regulator.It is possible for the led light driver to operate at a temperature of -40°C~85°C TA.A number of benefits are available to Camera Flash.The system operates at a frequency of 2MHz.It operates with 16 terminations.In this LED driver, the base is configured as 16.The segment count is 2.It has been mounted on Surface Mount.This LED driver has the part number LM3560.An acceptable maximum value for the supply voltage is 5.5V.As a result, it can also be classified as Display Drivers.The minimal input voltage is 2.5V.It achieves maximum efficiency with a minimal voltage supply of 2.5V.There is 5.5V maximum value for supply current.This electronic component can fully perform when the switching frequency is 2kHz.A LED driver that operates at 2A output current provides all the benefits of a LED driver.There is no external factor that consumes current when there is 900μA current consumption.
LM3560TLE-20/NOPB Features
Available in the 16-WFBGA, DSBGA package
Operating temperature of -40°C~85°C TA
Frequency of 2MHz
Supply voltage of 3.6V
Switching frequency of 2kHz
LM3560TLE-20/NOPB Applications
There are a lot of Texas Instruments LM3560TLE-20/NOPB LED Driver ICs applications.
- Panel lighting
- High-end retail lighting
- Flicker-free LED Lighting using R1580N
- Stage and Studio lighting
- Portable lighting
- LED backlight driver for LCD displays for portable equipment
- Scanners and Handy Terminals
- LED headlights
- Replacement lamps
- Architectural lighting
