LM3560TLX-20/NOPB
| Parameters | |
|---|---|
| Dimming | I2C |
| Max Input Voltage (DC) | 5.5V |
| Min Input Voltage (DC) | 2.5V |
| Number of Segments | 2 |
| Switching Frequency | 2kHz |
| Multiplexed Display Capability | NO |
| Nominal Input Voltage (DC) | 3.6V |
| Height | 675μm |
| Length | 2.5mm |
| Width | 2.3mm |
| Thickness | 675μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFBGA, DSBGA |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Camera Flash |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 2MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LM3560 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Quiescent Current | 900μA |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 1A Flash |
| Internal Switch(s) | Yes |
| fmax-Min | 0.4 MHz |
LM3560TLX-20/NOPB Overview
To save board space, it uses the 16-WFBGA, DSBGA package. For the design of these LED drivers, 2 outputs are used.Surface Mount represents this mounting method.Initially, it emerges as a DC DC Regulator with high efficiency and a high degree of reliability.The LED driver has the capability of operating at a temperature of -40°C~85°C TA.Camera Flash benefits significantly from the program.This system operates at 2MHz frequency.It operates with 16 terminations.Its configuration is based on 16 pins.A total of 2 segments are estimated.I have mounted it by Surface Mount.LED drivers have a base part number of LM3560.It is also classified into Display Drivers according to its characteristics.This device requires a minimum input voltage of 2.5V.In the event that the maximum supply current is allowed, it reaches 5.5V.As long as the switching frequency is maintained at 2kHz, this electronic component is able to perform all of its functions properly.LED drivers can deliver all benefits of 2A due to their maximum output current.There is no external factor that can consume current, so 900μA current is consumed.
LM3560TLX-20/NOPB Features
Available in the 16-WFBGA, DSBGA package
Operating temperature of -40°C~85°C TA
Frequency of 2MHz
Supply voltage of 3.6V
Switching frequency of 2kHz
LM3560TLX-20/NOPB Applications
There are a lot of Texas Instruments LM3560TLX-20/NOPB LED Driver ICs applications.
- Museum lighting
- Dimmable LED for vehicle interiors
- Amusement Machines
- LED Lighting PFCs, Linear Dimmable
- White LED Backlight for portable equipment
- Scanners and Handy Terminals
- Industrial LED Lighting: Image Recognition Devices
- High-end retail lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- General lighting
