LM3565TLE/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFBGA, DSBGA |
| Number of Pins | 16 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Camera Flash |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM3565 |
| Number of Outputs | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Output Current | 930mA |
| Max Supply Current | 10mA |
| Quiescent Current | 10mA |
| Max Output Voltage | 8.5V |
| Voltage - Output | 5.5V~8.5V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 5.5V |
| Min Output Voltage | 5.5V |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 930mA Flash |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 2 |
| Switching Frequency | 4MHz |
| Multiplexed Display Capability | NO |
| Nominal Input Voltage (DC) | 3.6V |
| Height | 675μm |
| Length | 2.5mm |
| Width | 2.3mm |
| Thickness | 675μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3565TLE/NOPB Overview
16-WFBGA, DSBGA package saves space on the board. LED drivers are designed with 1 outputs.Surface Mount is used for mounting.When it emerges as a DC DC Regulator, it shows high-performance and reliability.The led light driver is capable of working normally at -30°C~85°C TA.Camera Flash has many advantages.It is designed to work with 16 terminations.There are 16 pins on the base of this LED driver.It consists of 2 segments.Surface Mount has been mounted with the device.LED drivers are found under the base part number LM3565.An acceptable maximum value for the supply voltage is 5.5V.5.5V~8.5V is the output voltage.With a minimum input voltage of 2.5V volts, it can operate.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 2.5V.Supply current is limited to 5.5V at its maximum value.It is possible to provide high efficiency when the maximal supply current is less than 10mA.The load is capable of receiving 930mA current.Having the switching frequency at 4MHz enables this electronic component to perform at its best.A current of 10mA is consumed in the absence of external influences.Voltages should not exceed 8.5V volts at the output.A voltage of 5.5V is maintained as the minimal voltage it outputs.
LM3565TLE/NOPB Features
Available in the 16-WFBGA, DSBGA package
Operating temperature of -30°C~85°C TA
Switching frequency of 4MHz
LM3565TLE/NOPB Applications
There are a lot of Texas Instruments LM3565TLE/NOPB LED Driver ICs applications.
- White LED Backlight for portable equipment
- Street lighting
- High-end retail lighting
- Architectural lighting
- Panel lighting
- A- lamps
- General lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Sports Facility Lighting
- Flicker-free LED Lighting using R1580N
