banner_page

LM358ADGKRG4

30mA per Channel 20nA 65 dB Instrumentational OP Amps 16V 3V~32V ±1.5V~16V LM358 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LM358ADGKRG4
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 928
  • Description: 30mA per Channel 20nA 65 dB Instrumentational OP Amps 16V 3V~32V ±1.5V~16V LM358 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Details

Tags

Parameters
Amplifier Type General Purpose
Common Mode Rejection Ratio 65 dB
Current - Input Bias 20nA
Voltage - Supply, Single/Dual (±) 3V~32V ±1.5V~16V
Output Current per Channel 30mA
Input Offset Voltage (Vos) 3mV
Bandwidth 700 kHz
Unity Gain BW-Nom 700 kHz
Voltage Gain 100dB
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 2mV
Low-Bias NO
Micropower NO
Bias Current-Max (IIB) @25C 0.1μA
Programmable Power NO
Dual Supply Voltage 9V
Power NO
Input Offset Current-Max (IIO) 0.03μA
Height 1.07mm
Length 3mm
Width 3mm
Thickness 970μm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Packing Method TR
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number LM358
Pin Count 8
Operating Supply Voltage 16V
Number of Elements 2
Power Supplies +-1.5/+-15/3/30V
Operating Supply Current 1mA
Nominal Supply Current 1.2mA
Output Current 30mA
Slew Rate 0.3V/μs
Architecture VOLTAGE-FEEDBACK

LM358ADGKRG4 Overview


In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. A General Purpose-type buffer amplifier is shown here. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It is important to remember that this op amp should be operated at a voltage of 5V volts. Instrumentation amplifier is a part of Operational Amplifier. The op amp ic has an array of 8 pins on it. Op amp ic rates 3mV for input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, this op amp functions well at 0°C~70°C. It is possible to operate this buffer amplifier from a supply current of 1mA . The voltage gain should stay at 100dB. 2 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 16V. An buffer amplifier is packed in a TR-shape according to the design.

LM358ADGKRG4 Features


8 Pins
supply voltage of 5V
100dB voltage gain

LM358ADGKRG4 Applications


There are a lot of Texas Instruments LM358ADGKRG4 Instrumentational OP Amps applications.

  • Semiconductor detectors
  • Portable electronic products powered by batteries
  • Signal transformation
  • Band-pass filter
  • Differentiator circuits
  • Weak signal detection
  • Image computer boards
  • Radar
  • Strain gauges
  • Blood pressure sensors

Write a review

Note: HTML is not translated!
    Bad           Good