LM358ADR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM358A |
| Pin Count | 8 |
| Operating Supply Voltage | 16V |
| Number of Elements | 2 |
| Power Supplies | +-1.5/+-15/3/30V |
| Operating Supply Current | 1.5mA |
| Nominal Supply Current | 1.2mA |
| Output Current | 40mA |
| Slew Rate | 0.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 45nA |
| Voltage - Supply, Single/Dual (±) | 3V~32V ±1.5V~16V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 1MHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2mV |
| Max Frequency | 20kHz |
| Bias Current-Max (IIB) @25C | 0.1μA |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM358ADR2G Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. A General Purpose-type buffer amplifier is shown here. The op amp is delivered to you in a Tape & Reel (TR) case. There have been a total of 8 terminations over the past year. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are available on the instrumentation amplifier. Regarding input offset voltage, op amp rates 3mV. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . Using a supply current of 1.5mA , this buffer op amp will be able to operate. You should keep the voltage gain at 100dB for the time being. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply. The operating supply voltage of the buffer op amp is rated at 16V. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design.
LM358ADR2G Features
8 Pins
supply voltage of 5V
100dB voltage gain
LM358ADR2G Applications
There are a lot of ON Semiconductor LM358ADR2G Instrumentational OP Amps applications.
- Image computer boards
- Oscilloscopes
- Communication
- Proportional counter tubes
- Hand-held batteries
- Television broadcasting equipment
- MP3
- High/low-pass filter circuit
- Power control
- Portable docking station
