LM358AM/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 530mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LM358 |
| Pin Count | 8 |
| Operating Supply Voltage | 16V |
| Power Supplies | +-1.5/+-15/3/30V |
| Number of Channels | 2 |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 500μA |
| Power Dissipation | 530mW |
| Output Current | 30mA |
| Max Supply Current | 1.2mA |
| Slew Rate | 0.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 45nA |
| Voltage - Supply, Single/Dual (±) | 3V~32V ±1.5V~16V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2mV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.1μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Input Offset Current-Max (IIO) | 0.03μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM358AM/NOPB Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. This is a General Purpose type op amp. Upon delivery, op amp ic is packaged in a Tube case. It is estimated that there will be at least 8 terminations this year. In this case, there are 8 pins on the board. It is important to remember that this op amp should be operated at a voltage of 5V volts. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The op amp ic has an array of 8 pins on it. Regarding input offset voltage, buffer amplifier rates 3mV voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, op amp ranges 0°C~70°C. The buffer amplifier is capable of operating from a supply current of 1mA . You should keep the voltage gain at 100dB for the time being. As far as the device is concerned, buffer amplifier has 2 channels. The operating supply voltage of instrumentation amplifier is rated 16V voltage.
LM358AM/NOPB Features
8 Pins
supply voltage of 5V
100dB voltage gain
LM358AM/NOPB Applications
There are a lot of Texas Instruments LM358AM/NOPB Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Weighing systems
- earphone
- Fast A/D and D/A converters
- Large motor controllers
- Tablets
- MP3
- High/low-pass filter circuit
- Thermocouples
