banner_page

LM358AN

2 Channels 40mA per Channel 45nA 65 dB Instrumentational OP Amps 16V 3V~32V ±1.5V~16V LM358 8 Pins 8-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LM358AN
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 858
  • Description: 2 Channels 40mA per Channel 45nA 65 dB Instrumentational OP Amps 16V 3V~32V ±1.5V~16V LM358 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tube
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory Operational Amplifier
Packing Method RAIL
Technology BIPOLAR
Terminal Position DUAL
Number of Functions 2
Supply Voltage 5V
Base Part Number LM358
Pin Count 8
Operating Supply Voltage 16V
Power Supplies +-1.5/+-15/3/30V
Number of Channels 2
Operating Supply Current 1mA
Nominal Supply Current 500μA
Power Dissipation 830mW
Output Current 30mA
Slew Rate 0.1V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 65 dB
Current - Input Bias 45nA
Voltage - Supply, Single/Dual (±) 3V~32V ±1.5V~16V
Output Current per Channel 40mA
Input Offset Voltage (Vos) 3mV
Bandwidth 1MHz
Unity Gain BW-Nom 1000 kHz
Voltage Gain 100dB
Power Supply Rejection Ratio (PSRR) 65dB
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 2mV
Bias Current-Max (IIB) @25C 0.1μA
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status Non-RoHS Compliant
Lead Free Lead Free

LM358AN Description


The LM358AN is made up of two independent, high gain, internal frequency adjusted operational amplifiers that were designed to operate across a wide variety of voltages from a single power source. It is also possible to operate from split power supplies, and the low power supply current drain is unaffected by the amount of the power supply voltage. Transducer amplifiers, dc gain blocks, and all traditional op-amp circuits are among the applications that may now be implemented more simply in single power supply systems. The LM158 series, for example, may run directly from the common 3.3-V power supply voltage used in digital systems, providing all of the essential interface devices without the need for additional 15V power supplies.



LM358AN Features


  • Very Low Supply Current Drain (500μA)—Essentially Independent of Supply Voltage 

  • Low Input Offset Voltage: 2 mV

  • Input Common-Mode Voltage Range Includes Ground

  • Differential Input Voltage Range Equal to the Power Supply Voltage

  • Large Output Voltage Swing

  • Internally Frequency Compensated for Unity Gain



LM358AN Applications


  • Active Filters

  • General Signal Conditioning and Amplification

  • 4- to 20-mA Current Loop Transmitters


Write a review

Note: HTML is not translated!
    Bad           Good