LM358AN/NOPB

20mA per Channel 45nA 65 dB Instrumentational OP Amps 16V 3V~32V ±1.5V~16V LM358 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-LM358AN/NOPB
Package: 8-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 162
Description: 20mA per Channel 45nA 65 dB Instrumentational OP Amps 16V 3V~32V ±1.5V~16V LM358 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Contact Plating	Tin
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Weight	4.535924g
Operating Temperature	0°C~70°C
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Max Power Dissipation	830mW
Technology	BIPOLAR
Terminal Position	DUAL
Number of Functions	2
Supply Voltage	5V
Base Part Number	LM358
Pin Count	8
Operating Supply Voltage	16V
Number of Elements	2
Power Supplies	+-1.5/+-15/3/30V
Operating Supply Current	1mA
Nominal Supply Current	500μA
Power Dissipation	830mW
Output Current	30mA
Slew Rate	0.1V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	65 dB
Current - Input Bias	45nA
Voltage - Supply, Single/Dual (±)	3V~32V ±1.5V~16V
Output Current per Channel	20mA
Input Offset Voltage (Vos)	2mV
Bandwidth	1MHz
Unity Gain BW-Nom	1000 kHz
Voltage Gain	100dB
Power Supply Rejection Ratio (PSRR)	65dB
Low-Offset	NO
Frequency Compensation	YES
Current - Output / Channel	40mA
Low-Bias	NO
Micropower	NO
Bias Current-Max (IIB) @25C	0.1μA
Programmable Power	NO
Input Offset Current-Max (IIO)	0.03μA
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

LM358AN/NOPB Overview

The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. There have been a total of 8 terminations over the past year. A total of 8 pins are located on this board. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 8 pins are located on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 2mV. For this electrical component, Through Hole is the recommended mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . Using an 1mA supply current, this operational amplifier ics can be operated. 100dB should be the voltage gain. The op amp is rated for an operating supply voltage of 2. The operating supply voltage of instrumentation amplifier is rated 16V voltage.