LM358APE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 8 |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Pin Count | 8 |
| Operating Supply Voltage | 16V |
| Number of Elements | 2 |
| Power Supplies | +-1.5/+-15/3/30V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 32V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 1.2mA |
| Current - Output | 30mA |
| Slew Rate | 0.3 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 100nA |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 700 kHz |
| Gain Bandwidth Product | 700 kHz |
| Unity Gain BW-Nom | 700 kHz |
| Voltage Gain | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 16V |
| Low-Bias | NO |
| Micropower | NO |
| Min Dual Supply Voltage | 1.5V |
| Bias Current-Max (IIB) @25C | 0.1μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.03μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LM358APE4 Overview
The linear amplifier is packaged in a PDIP case which makes it easy for the consumer to handle. There are two types of operational amplifiers in this circuit. As far as the packaging is concerned, buffer op amp is delivered in a Rail/Tube case. It is estimated that there will be at least 8 terminations this year. Buffer amplifier has a total of 8 pins on it. It is important to remember that this op amp should be operated at a voltage of 5V volts. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. Using an 1mA supply current, this operational amplifier ics can be operated. 100dB should remain the voltage gain. Using this buffer op amp requires a temperature of at least 0°C. Use op amps only at temperatures no higher than 70°C. A total of 2 elements are present in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 16V voltage. It is important to keep in mind that the power supply voltage of this electric component is below 32V, which is suitable. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 3V when using it. The dual supply voltage of 16V should be used for the conduct of this electronic component.
LM358APE4 Features
8 Pins
supply voltage of 5V
100dB voltage gain
LM358APE4 Applications
There are a lot of Texas Instruments LM358APE4 Instrumentational OP Amps applications.
- Mobile phone
- Professional videography
- Exponential operation circuits
- Signal operation
- Automation control systems
- Inverse/same-phase proportional circuit
- Television
- Navigation
- Cinema or auditorium audio system
- Medical instruments
