LM358M/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 530mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LM358 |
| Pin Count | 8 |
| Operating Supply Voltage | 16V |
| Power Supplies | +-1.5/+-15/3/30V |
| Number of Channels | 2 |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 500μA |
| Power Dissipation | 530mW |
| Output Current | 30mA |
| Max Supply Current | 1.2mA |
| Slew Rate | 0.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 45nA |
| Voltage - Supply, Single/Dual (±) | 3V~32V ±1.5V~16V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2mV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Input Offset Current-Max (IIO) | 0.05μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM358M/NOPB Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. An op amp of this type is a General Purpose-type. The op amp is delivered to you in a Tube case. In recent months, the number of terminations has approached 8. In total, there are 8 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The op amp ic has an array of 8 pins on it. Op amp rates 7mV as input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. Using a supply current of 1mA , this buffer op amp will be able to operate. You should keep the voltage gain at 100dB for the time being. As far as the device is concerned, buffer amplifier has 2 channels. The operating supply voltage of instrumentation amplifier is rated 16V voltage.
LM358M/NOPB Features
8 Pins
supply voltage of 5V
100dB voltage gain
LM358M/NOPB Applications
There are a lot of Texas Instruments LM358M/NOPB Instrumentational OP Amps applications.
- earphone
- Scintillation detectors
- single/dual op amp sum and difference circuits
- High-frequency data acquisition systems
- Power control
- Signal filtering
- Precision measurement
- Comparator
- High/low-pass filter circuit
- Fission chambers
