LM358PE4

30mA per Channel 20nA 65 dB Instrumentational OP Amps 0.5μA 16V 3V~32V ±1.5V~16V LM358 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-LM358PE4
Package: 8-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 150
Description: 30mA per Channel 20nA 65 dB Instrumentational OP Amps 0.5μA 16V 3V~32V ±1.5V~16V LM358 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	BIPOLAR
Terminal Position	DUAL
Number of Functions	2
Supply Voltage	5V
Base Part Number	LM358
Pin Count	8
Operating Supply Voltage	16V
Number of Elements	2
Power Supplies	+-1.5/+-15/3/30V
Operating Supply Current	1mA
Nominal Supply Current	1.2mA
Output Current	30mA
Slew Rate	0.3V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	65 dB
Current - Input Bias	20nA
Voltage - Supply, Single/Dual (±)	3V~32V ±1.5V~16V
Output Current per Channel	30mA
Input Offset Voltage (Vos)	7mV
Bandwidth	700 kHz
Unity Gain BW-Nom	700 kHz
Voltage Gain	100dB
Average Bias Current-Max (IIB)	0.5μA
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	3mV
Low-Bias	NO
Micropower	NO
Programmable Power	NO
Power	NO
Input Offset Current-Max (IIO)	0.05μA
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

LM358PE4 Overview

Op amp is packaged in 8-DIP (0.300, 7.62mm) case. The instrumentation amplifier in this picture is of the General Purpose-type. The op amp is delivered to you in a Tube case. The number of terminations approaches 8. In this case, there are 8 pins on the board. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. It should be noted that this op amp is a type of Operational Amplifier device. An 8-pin op amp ic is included in the package. There is an input offset voltage of 7mV for this buffer op amp. It is recommended that this electronic component be mounted using the Through Hole mounting type. With regard to operating temperature, op amp ranges 0°C~70°C. Using an 1mA supply current, this operational amplifier ics can be operated. It is a member of the 100dB's 100dB family. According to the specifications of the buffer op amp, the operating supply voltage is rated at 2. The operating supply voltage of instrumentation amplifier is rated 16V voltage.