LM3630ATMX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFBGA, DSBGA |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Frequency | 500kHz |
| Base Part Number | LM3630 |
| Number of Outputs | 2 |
| Output Voltage | 40V |
| Max Output Current | 28mA |
| Max Supply Voltage | 5.5V |
| Output Current | 20mA |
| Max Supply Current | 350μA |
| Quiescent Current | 1μA |
| Max Output Voltage | 40V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.3V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 28.5mA |
| Min Output Voltage | 12V |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| fmax-Min | 0.08 MHz |
| Dimming | PWM |
| Max Input Voltage (DC) | 5.5V |
| Min Input Voltage (DC) | 2.3V |
| Number of Segments | 20 |
| Switching Frequency | 500kHz |
| Multiplexed Display Capability | NO |
| Nominal Input Voltage (DC) | 3.6V |
| Height | 675μm |
| Length | 0m |
| Width | 0m |
| Thickness | 420μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3630ATMX Overview
It saves board space with the 12-WFBGA, DSBGA package. LED drivers designed using this technology use 2 outputs.For mounting, it uses the Surface Mount method.As a DC DC Regulator, it has high efficiency and reliability.The led light driver is capable of operating at the operating temperature of -40°C~85°C TA.There are many benefits for Backlight.As a result, it operates in accordance with the frequency of 500kHz.12 terminations are used in its operation.This configuration is built upon 12 pins.The segment count is 20.The device has been mounted on the Surface Mount.LED drivers are found under the base part number LM3630.5.5V is an acceptable maximum value for the supply voltage.In addition to Display Drivers, it is also classified by its characteristics.As its minimal input voltage, it operates at 2.3V.The maximum value of supply current is 5.5V.It is possible to obtain a high efficiency with this device when the maximum supply current is less than 350μA.In this case, the load can only be supplied with 20mA current.The electronic component can fully perform its functions if the switching frequency is maintained at 500kHz.When operating with a 28mA output current, the LED driver delivers all the benefits.1μA current is consumed in the case of no external factors.There is 40V voltage output from it.40V should be the maximum output voltage.A voltage of 12V is maintained as the minimal voltage it outputs.
LM3630ATMX Features
Available in the 12-WFBGA, DSBGA package
Operating temperature of -40°C~85°C TA
Frequency of 500kHz
Supply voltage of 3.6V
Switching frequency of 500kHz
Output voltage of 40V
LM3630ATMX Applications
There are a lot of Texas Instruments LM3630ATMX LED Driver ICs applications.
- LED backlight driver for LCD displays for Tablets and Note PCs
- LED headlights
- Refrigeration lighting
- Dimmable LED for vehicle interiors
- Auxiliary lights for on-vehicle cameras
- LED backlight driver for LCD displays for portable equipment
- Medical surgery lighting
- Stage and Studio lighting
- Down lights
- Replacement lamps
