LM3632AYFFR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-UFBGA, DSBGA |
| Number of Pins | 30 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight, Camera Flash |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.7V |
| Terminal Pitch | 0.4mm |
| Frequency | 500kHz~1MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LM3632 |
| Pin Count | 30 |
| Number of Outputs | 2 |
| Max Output Current | 50mA |
| Max Supply Voltage | 5.5V |
| Max Output Voltage | 29V |
| Topology | Step-Up (Boost) |
| Output Current per Channel | 1.5A |
| Current - Output / Channel | 1.5A Flash |
| Internal Switch(s) | Yes |
| Dimming | Analog |
| Number of Segments | 16 |
| Switching Frequency | 1MHz |
| Voltage - Supply (Max) | 5.5V |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 625μm |
| Length | 2.2mm |
| Width | 2.59mm |
| Thickness | 375μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3632AYFFR Overview
As a result of its 30-UFBGA, DSBGA package, it helps to save board space on the board. There are 2 outputs used for the design of this LED drivers.The led light driver is mounted using Surface Mount.With high efficiency, it appears as a DC DC Regulator.The led light driver operates normally at -40°C~85°C TA. The benefits of Backlight, Camera Flash are considerable.In this case, the frequency is 500kHz~1MHz.The operation of this system is supported by 30 terminations.With a base of 30, this LED light driver is configured.In the absence of a voltage supply of at least 2.7V, undetermined failures may occur.The segment count is 16.It's mounted by Surface Mount.LM3632 is the base part number for the LED driver.It's acceptable for the voltage to be 5.5V.In this device, there are 30 pins.An optimized supply voltage of 5.5V is provided.As long as the switching frequency is maintained at 1MHz, this electronic component is able to perform all of its functions properly.At maximum output current 50mA, it will deliver all the benefits of a LED driver.It is important that the output voltage does not exceed 29V.
LM3632AYFFR Features
Available in the 30-UFBGA, DSBGA package
Operating temperature of -40°C~85°C TA
Frequency of 500kHz~1MHz
Supply voltage of 3.7V
Switching frequency of 1MHz
LM3632AYFFR Applications
There are a lot of Texas Instruments LM3632AYFFR LED Driver ICs applications.
- LED backlight driver for LCD displays for portable equipment
- Amusement Machines
- Museum lighting
- A- lamps
- Portable lighting
- Panel lighting
- Constant Voltage Power Source for portable equipment
- OLED power supply for portable equipment
- Auxiliary lights for on-vehicle cameras
- LED Lightings for Industrial Equipment
