LM3642TLX/NOPB
| Parameters | |
|---|---|
| Topology | Step-Up (Boost) |
| Output Current per Channel | 1.5A |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 1.5A Flash |
| Internal Switch(s) | Yes |
| Dimming | I2C |
| Number of Segments | 1 |
| Voltage - Supply (Min) | 2.5V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 675μm |
| Length | 2mm |
| Width | 1.8mm |
| Thickness | 675μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 9-WFBGA, DSBGA |
| Number of Pins | 9 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Camera Flash |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 4MHz |
| Base Part Number | LM3642 |
| Number of Outputs | 1 |
| Power Supplies | 3.6V |
| Max Supply Voltage | 5.5V |
| Nominal Supply Current | 750μA |
| Output Current | 2A |
| Max Supply Current | 750μA |
| Quiescent Current | 750μA |
| Voltage - Output | 5V |
LM3642TLX/NOPB Overview
The 9-WFBGA, DSBGA package is used for saving board space. A LED driver using this design has 1 outputs.This mounting method is Surface Mount.In this case, the result is a DC DC Regulator with high efficiency.The LED driver is capable of operating at a temperature of -40°C~85°C TA.There are considerable benefits for Camera Flash.As a result, it operates based on the frequency of 4MHz.9 terminations are designed for its operation.This LED driver is configured with a base of 9 pins.A voltage supply less than 2.5V will cause undetermined failures.1 segments are present.It's mounted on the way to Surface Mount.LM3642 is the base part number for this LED driver.5.5V is a maximum acceptable voltage for the supply.The device has a voltage output of 5V volts.According to its characteristics, it is also classified into Display Drivers.As long as the maximum supply current is under 750μA, it can deliver high efficiency.2A is the maximum current the load can handle.When no external factors are present, there is 750μA current consumption.
LM3642TLX/NOPB Features
Available in the 9-WFBGA, DSBGA package
Operating temperature of -40°C~85°C TA
Frequency of 4MHz
Supply voltage of 3.6V
LM3642TLX/NOPB Applications
There are a lot of Texas Instruments LM3642TLX/NOPB LED Driver ICs applications.
- Down lighting
- White LED Backlight for portable equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Flicker-free LED Lighting using R1580N
- OLED power supply for portable equipment
- Linear fluorescent
- Museum lighting
- High-end retail lighting
- Stage and Studio lighting
- General lighting
