LM3658SD/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESTART THRESHOLD VOLTAGE IS 4 VOLT |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM3658 |
| Pin Count | 10 |
| Output Voltage | 4.2V |
| Max Output Current | 1A |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Interface | USB |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 4.35V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 1A |
| Adjustable Threshold | YES |
| Nominal Input Voltage | 6V |
| Fault Protection | Over Current, Over Temperature |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Current - Charging | Constant - Programmable |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3658SD/NOPB Overview
It comes in the package?of a Tape & Reel (TR). It can be found in package 10-WFDFN Exposed Pad.There is a mounting type of Surface Mount for this device.The temperature should be set to -40°C~85°C TA to ensure reliable performance.Using an analog IC of type POWER SUPPLY SUPPORT CIRCUIT, this device is able to communicate with the outside world.To charge the device, you will need to supply it with Constant - Programmable of current.It is possible to find related parts of this device by using the base part number LM3658.I have found that the number of terminations found in it as a whole is 10.Total number of pins: 10.In order for it to work, it requires 10 pins.The number of available channels is 1.There is a possibility that it can be powered by a 5V battery.An input voltage of 6V can be applied to the device without damage.In the case of 4.2V, the output voltage is likely to produce high efficiency.The output current is set to 1A in this case.There is a subcategory of Power Management Circuits for this device.A supply voltage of 4.35V is suitable for it, because it can operate with a low supply voltage.It is mounted in the way of Surface Mount.The power supply for this part is set to 5V.Additional features of RESTART THRESHOLD VOLTAGE IS 4 VOLT can also be generated by the device.In order to comply with the constraints, the maximum output current is reduced to 1A.
LM3658SD/NOPB Features
1 channels
Power Management Circuits subcategory
Addtional features of RESTART THRESHOLD VOLTAGE IS 4 VOLT
10-WFDFN Exposed Pad package
LM3658SD/NOPB Applications
There are a lot of Texas Instruments LM3658SD/NOPB Battery Chargers ICs applications.
- Maintenance shops
- High end, feature-rich consumer
- Battery backup applications
- Fleet management
- Laptops
- Automotive/electrical vehicle
- GPS tracker
- Wireless power
- Military equipment
- Charging cradle for wearable devices
